|
| Tools and Accessory Menu |
| |
 |
| TOOL, SPRING REMOVAL | 22002922 |
|
| The supension sping tool is used to remove and replace suspention springs on Atlantis, Perfoma, and earlier models of our brand name washers. |
|
|
Color Picture for printing
|
|
 |
| TOOL, BRAKE PKG. ASSY. | 038315 |
|
| Designed to remove the brake assembly from Maytag automatic washers. |
|
|
Color Picture for printing
|
|
 |
| TOOL TO REMOVE DRUM BEARING | 038320 |
|
| Designed to aid in the removal of the drum bearing on Maytag dryers prior to "08" series. |
|
|
Color Picture for printing
|
|
 |
| AGITATOR PULLER-ALL MODELS | 038323 |
|
| For use with hard to remove agitators on Maytag washers. Arm also availible separately P/N (038563). Includes washers and nuts. |
|
|
Color Picture for printing
|
|
 |
| TOOL-INSTALL CENTER SHAFT | 038555 |
|
| Designed to "fill in" helical threads on Maytag washer transmission center shaft (prior to lip seal models). Prevents damage to internal "O" ring. |
|
|
Color Picture for printing
|
|
 |
| BRAKE REMOVAL UPDATE | 12002011 |
|
| Accessory Kit to upgrade LA-2004 Tool |
|
|
Color Picture for printing
|
|
 |
| BRAKE/TUB REMOVAL KIT | 12002012 |
|
| New Generation Break and Removal Tool (LA-2004 subs to this Upgrade) |
|
|
|
|
 |
| SEAL INST & REM | 14242 |
|
| For use in installing and removing transmission seals on all washers except Maytag. |
|
|
Color Picture for printing
|
|
 |
| SPIN HUB WRENCH | 14916 |
|
| For use in removing spin hub on all brand washers produced prior to November 1991 except Maytag. Also used on 1983 and older Speed Queen models with fluid drive. |
|
|
Color Picture for printing
|
|
 |
| TUBE THREAD CHASER (NET) | 14922 |
|
| Designed to re-thread basket drive tube before reassembly on all model washers except Maytag. |
|
|
Color Picture for printing
|
|
 |
| LIP SEAL TOOL KIT | 20000021 |
|
| Designed to remove transmission lip seal on all model washers including Maytag. |
|
|
Color Picture for printing
|
|
 |
| TUB COVER GASKET TOOL | 273P4 |
|
| For removal of and installation of lid cover gasket. |
|
|
Color Picture for printing
|
|
 |
| TAMPER RESISTANT BIT | 282P4 |
|
| #T25H Tamper resistant 1/4 drive. |
|
|
Color Picture for printing
|
|
 |
| HEX WRENCH | 306P4 |
|
| For removal of tub nut on washers. |
|
|
Color Picture for printing
|
|
 |
| REPLACEMENT BOLT FOR 294P4 | 294P4B |
|
| Replacment bolt for heavy duty adjustable puller. |
|
|
Color Picture for printing
|
|
 |
| SEAL TOOL | 293P4 |
|
| For the installation seals on washers. |
|
|
Color Picture for printing
|
|
 |
| DRIVE BELL TOOL | 294P4 |
|
| Heavy duty adjustable puller. Used for removal and installation of drve bell to transmission shaft. |
|
|
Color Picture for printing
|
|
 |
| LINT BRUSH, TUB COVER | 22002696 |
|
| This nylon brush has a long wire handle which can be bent to form the angle needed to stroke across the lint brush located in the Neptune tub cover, brushing the tub cover free of lint. |
|
|
Color Picture for printing
|
|
 |
| WRENCH, SPANNER | 22038313 |
|
| For use in removing tub nut and stem seal assembly from Maytag washers. |
|
|
Color Picture for printing
|
|
 |
| SPANNER WRENCH BASKET DRIVE | 35-2968 |
|
| For use in removing spin hubon washers produced after November 1991 except Maytag. |
|
|
Color Picture for printing
|
|
 |
| PUMP, LIQUID TRANSFER | 20001104 |
|
| LX Liquid transfer pumping rate is 2.5 lbs/min., LX pump for use with any refrigerant. Increase the recycling process effciency. |
|
|
Color Picture for printing
|
|
 |
| PUMP, MONGOOSE RECOVERY | 20001105 |
|
| Vapor recovery at the rate of 0.1 lbs/min. Liquid is moved at 1.6 lbs/min. Push/Pull refrigerant transfer is5.5 lbs/min. Lightweight - less than 9 lbs., Pumps both liquid and vapor, No oil required, can run dry, Able to pull a vacuum. |
|
|
Color Picture for printing
|
|
 |
| RACK, VEHICLE 3 BASKET | 20001108 |
|
| Note: 3 position Van Tank Rack with Black Vinyl Coating. Holds 15 lb and 30 lb Tanks. |
|
|
Color Picture for printing
|
|
 |
| TANK, 15# W/FLOAT SWITCH | 20001113 |
|
| Note: Manchester 15 lb. refrigerant recovery tank with float switch. |
|
|
Color Picture for printing
|
|
 |
| CONDENSER CLEANING BRUSH | 20001017 |
|
| For use in cleaning bottom mount coils and fan blade motor. Helps extend the life of a refrigerator and eliminate costly repairs. |
|
|
Color Picture for printing
|
|
 |
| WRENCH, SEALED BURNER | 8312D075-60 |
|
| Used for removal of the sealed burner on most sealed burner gas ranges and cooktops. |
|
|
Color Picture for printing
|
|
 |
| MICROWAVE OVEN TESTER | R0157397 |
|
| Used to test microwave oven output. Includes thermometer, plastic measuring container and instruction sheet. |
|
|
Color Picture for printing
|
|
 |
| MICROWAVE LEAKAGE METER | 038218 |
|
| Designed to easily and accurately measure the leakage from microwave ovens. Case included. |
|
|
Color Picture for printing
|
|
 |
| Y-BIT DRIVE-FOR INNER DOOR SCR | R0193574 |
|
| Amana Radar Ranges. |
|
|
Color Picture for printing
|
|
 |
| PROBE KIT,THROW AWAY (PKG OF3) | 12001394 |
|
| * |
|
|
Color Picture for printing
|
|
 |
| KIT, SCREWS #50 | 12500080 |
|
| Pack of 50 (pan head torx) |
|
|
Color Picture for printing
|
|
 |
| DROPCLOTH-SERVICE | 16100018 |
|
| 35"x29" double thick drop cloth to avoid damage to customer's surfaces. |
|
|
Color Picture for printing
|
|
 |
| TEMP PROBE PERMANET | 20000013 |
|
| High temp probe with type K to banana plug adapter. |
|
|
Color Picture for printing
|
|
 |
| DRIVE HANDLE (REG-BLUE) | 20000033 |
|
| Handle for interchangable screw driver shafts and bits. |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
| ADJUSTABLE WRENCH-6 INCH | 20000042 |
|
| Insulated handle |
|
|
Color Picture for printing
|
|
 |
| DRIVER HANDLE (STUBBY-BLUE) | 20000043 |
|
| Handle for interchangable screw driver shafts and bits. |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
| 1/4 STANDARD SCREWDRIVER BLADE | 20000052 |
|
| * |
|
|
Color Picture for printing
|
|
 |
| EXTENSION SHAFT | 20000053 |
|
| Extends reach, used with interchangable screw driver shafts. |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
| SLIPJOINT PLIERS 7 | 20000058 |
|
| Offset jaws with insulated handles. |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
| POWER SCREWDRIVER ADAPTER | 20000064 |
|
| Adapts interchangable screw driver shafts to power drill. |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
| TORIX TOOL KIT CASE | 20000078 |
|
| This is the replacment case for Torx kit P/N 20000072, Hook and loop strap closure, Heavy duty canvas. |
|
|
Color Picture for printing
|
|
 |
|
|
Color Picture for printing
|
|
 |
| CRIMPING TOOL | 20001086 |
|
| Includes spring loaded wire stripper and cutter. Insulated handles. |
|
|
Color Picture for printing
|
|
 |
| THERMOMETER, MINI-TEMP | 20001101 |
|
| Infrarot-therometer, takes readings remotely. Temperture range switchable between Celsius and Fahrenheit -18 C to 260 C (0 F to 500 F) Can be read from up to 6 feet away. Compact, Easy to use. Pouch and wrist strap avalable seperately P/N 2001102. |
|
|
Color Picture for printing
|
|
 |
| NON-SLIP DISC | 211692 |
|
| Self adhesive 2" dia. rough surface disk to prevent slipping. |
|
|
Color Picture for printing
|
|
 |
| PIERCING VALVE (1/4) | RA95139-1 |
|
| Used for sealed system access. |
|
|
Color Picture for printing
|
|
 |
| PIERCING VALVE (5/16) | RA95139-2 |
|
| Used for sealed system access. |
|
|
Color Picture for printing
|
|
 |
| WATER HARDNESS TEST KIT | 038184 |
|
| Exceptionally useful kit which provides accurate measurement of water hardness in grains. For use as an aid to proper detergent usage in washers and dishwasher. Hardness 3 Titrant Solution. All brands. |
|
|
Color Picture for printing
|
|
 |
| TORX BIT (TX20H) | 038227 |
|
| Torx #20 for use with 1/4" hex head driver. |
|
|
Color Picture for printing
|
|
 |
| PLIERS FOR RETAINING RING | 038705 |
|
| Fits most external ring type retainer clips. Features adjustment screw to prevent stretching of clips. Insulated handles. |
|
|
Color Picture for printing
|
|
 |
| CLAMP ON AMMETER | 20000002 |
|
| Features automatic range selection and data-hold function; lightweight. Reads up to 500V AC, 400 amps, 1999 ohms. Also has continuity beeper and low battery display. |
|
|
Color Picture for printing
|
|
 |
| APPLIANCE TEST METER | 20000005 |
|
| Designed for use in servicing most household appliances and other electrical devices. |
|
|
Color Picture for printing
|
|
 |
| TEST AIR METER W/CASE&LEADS | 20000029 |
|
| A precision air velocity and static pressure indicator based on the principle of the variable area flowmeter. Used to diagnose restricted vents. Has air velocity and static pressure indicator. |
|
|
Color Picture for printing
|
|
 |
| APPLIANCE TOOL KIT | 20000031 |
|
| Full set of small hand tools. Includes interchangable handles, Pliers, Wrenches, and screwdriver blades. |
|
|
Color Picture for printing
|
|
 |
| SPECIAL MAYTAG CANVAS CASE | 20000032 |
|
| This is the replacment case for the P/N 20000031 tool kit. |
|
|
Color Picture for printing
|
|
 |
| AC VOLTAGE SENSOR | 20000081 |
|
| Used for determining the presence or absents of AC voltage in insulated wires, receptacles, fuses, boxes, switches and other voltage carrying systems. Detects 110-600 volts AC. |
|
|
Color Picture for printing
|
|
 |
| WRENCH, SPANNER | 20000084 |
|
| Used in the disassembly of current model food waste disposers. Use with part number 20000083 (wrench assembly). |
|
|
Color Picture for printing
|
|
 |
| METER | 20001001 |
|
| Features LCD display and tilt stand. Checks AC volts up to 750V, current up to 10 amps, resistance to 20 meg ohms, DC volts to 1000V, DC current to 10 amps and temperture from -50 degrees F to 1400 degrees F. |
|
|
Color Picture for printing
|
|
 |
| TOOL, NON CONTACT TEMP MEASURE | 20001056 |
|
| Checks temperatures, locates hotspots, identifies transformer malfunctions and prevents arcing, fires and power outages. Has range of - 32 C to 400 C (-25 F to 750 F) and can be read up to10 feet. Hard case included. |
|
|
Color Picture for printing
|
|
 |
| MOVER, APPLIANCE | 20001057 |
|
| Will move up to 350 lbs. Great for refrigerators. |
|
|
Color Picture for printing
|
|
 |
| LOGGER, ELECTRONIC TEMPERATURE | 20001078 |
|
| Continuously reads temperatures every two minutes.Temp range -40 C to 85 C (-40 F to 185 F) Includes software disc. Can be used with IBM or Microsoft Windows. |
|
|
Color Picture for printing
|
|
 |
| PLIERS, HOSE | 20001120 |
|
| Sure grip inlet hose pliers. No more skinned knuckles. Great for washers with indented water valves. |
|
|
Color Picture for printing
|
|
 |
| AVDEL MANUAL DRIVER | R0193556 |
|
| Driver for tamper resistant screws on Amana commercial microwave. |
|
|
Color Picture for printing
|
|
 |
| ESCUTCHEON REMOVAL TOOL | R0193557 |
|
| Amana Radar Ranges |
|
|
Color Picture for printing
|
|
 |
| KIT, FIRST AID | 20001058 |
|
| A kit with supplies to treat most minor cuts, scraps, and burns. Heavy duty case. Refill packets are available. |
|
|
Color Picture for printing
|
|
 |
| CAPACITOR KIT | 206103 |
|
| For use as an add-on kit for Maytag washers installed in low voltage (105V-110V) situations. Aids in starting motor. |
|
|
Color Picture for printing
|
|
 |
| DRYER VENTING KIT (BOXED) | 306436 |
|
| |
|
|
Color Picture for printing
|
|
 |
| 4" DRYER VENT BRUSH W/20 FT." | 18001034 |
|
| Used for cleaning lint and dust from dryers vents. 4" diameter. |
|
|
Color Picture for printing
|
|
 |
| Boss | 20001121 |
|
| Filter Burnout Flushing Kit |
|
|
|
|
 |
| Strainer | 20001122 |
|
| Replacements for Strainer in Boss |
|
|
|
|
 |
| LPT Gripper | 20001123 |
|
| Multi-diameter quick process tube connector tool for refrigerant recovery For use with 3/8 inch to 1/2 inch tubing. |
|
|
|
|
 |
| MPT Gripper | 20001124 |
|
| Multi-diameter quick process tube connector tool for refrigerant recovery. For use with 1/4 inch to 3/8 inch tubing. |
|
|
|
|
 |
| SPT Gripper | 20001125 |
|
| Multi-diameter quick process tube connector tool for refrigerant recovery. For use with 1/16 inch to 1/4 inch tubing) |
|
|
|
|
 |
| Boss Kit | 20001127 |
|
| 1 Boss Burn Out Accessory Kit,2 MPT Medium Size Gripper Tools and 1 SPT Small Size Gripper Tool. 1 Connector Hose and 1 Carry Case. |
|
|
|
|
